miniflip flysupa

By daich on Jun 24, 2024

1  0  0

Finally finished this supafly flipmini

Stephen was one of the first pilots I met. Back in 2017 I brought my very first build out on the field and it was a disaster as the dsm/spektrum receiver had a range of about 10 meters out in an open field. Stephen was there as well, testing one revision of his prototype syncmode. I got to handle it and still remember to this day the exquisite quality of carbon it was made up of. So much lighter and stiffer with delicious camfered edges.

After all these years, I finally bought one of his frames. Fate was sealed the moment the flipmini was announced. Finally a chance to experience Stephen's detailed custom tunes.

It took me way too long to find the proper target to this old fullspeedrc flight controller
target - DAFP/DARWINF411(STM32F411)

I didn't want to solder under the board so I used the LED pad for RX2
resource LED_STRIP 1 A08
resource SERIAL_RX 2 A03
resource LED_STRIP 1 none
resource SERIAL_RX 2 A08

Then after all that I discovered the inverted sbus pad is on the bottom so I had to solder onto the bottom in the end anyway.

I think the F411 may be too weak. I had to turn down the pid loop and overclock to 120mhz to reduce the dshot bidirectional error rate to zero. The cpu load sits at 55% at idle. kind of high. we'll see how it flies.

changing motor order
resource MOTOR 1 none
resource MOTOR 2 none
resource MOTOR 3 none
resource MOTOR 4 none
resource MOTOR 1 B07
resource MOTOR 2 B06
resource MOTOR 3 B05
resource MOTOR 4 B04

Brand name: FullSpeed
Item name: FSD435 Flight Tower
Weight: 9g
Usage: for 85mm-250mm Frame Kit

FSD F411 Flight Controller Board
CPU: STM32 F411
Input Voltage: 2-4S Lipo
Built-in Betaflight OSD to adjust PID
BEC Output: 5V/3A
Size: 27.5x27.5mm board, 20mm mounting holes (M2)
Support SBUS/PPM/DSM receiver

FSD 35A BLHeli_S 2-4S ESC
Input Voltage: 2-4S Lipo battery
Constant Current: 35A
BEC Output: NO
Size: 27x27mm (main board)
Installing Hole:20x20mm,M2
Weight: 5.1g
Protocol: DSHOT600/300/150/Oneshot125/42,MultiShot


Part List


Flipmini (2 builds)

Flight Controller

FSD F411 Flight Controller for FSD428 FSD435 (2 builds)


FSD435 35A F411 Flight Tower (2 builds)


FSD 35A 2-4S 4in1 ESC


4 x BrotherHobby VY 1504.5 Motor (CW)


4 x Brotherhobby VY 1504.5 3950kv


Gemfan Hurricane 3525-3 Tri-Blade Prop (2CW+2CCW) (3 builds)

FPV Camera

DJI O3 Air Unit FPV Camera Module (12 builds)

FPV Transmitter

DJI O3 Air Unit Transmission Module (27 builds)


RDQ 5.8GHz U.FL Dipole FPV Antenna - Linear (85 builds)


RadioMaster Zorro ExpressLRS (ELRS) Protocol Radio Controller (25 builds)


SKYZONE SKY04X V2 FPV Goggles Sky04 DVR OLED 5.8G 48CH 1280X960 Steadyview Receiver with Head Tracker For RC Drone Quadcopter FP (2 builds)

3D Printed

This site requires JavaScript enabled
See Site

HD Camera

RunCam Thumb Pro W (8 builds)

Video Receiver

SKYZONE Steadyview/Rapidmix Receiver for FPV Goggles 48CH 5.8Ghz V3.3 (3 builds)

Battery Charger

608 AC Lipo Battery Charger,AC 50W/DC 200W Dual Mode RC Discharger/Cha (3 builds)

Misc Supplies

Ender-3 3D Printer (2 builds)
Show stores (13)


Sign in to comment

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more