The Babymod 2.5" O3

By airrage on Jun 10, 2024

4  0  0

Whoa, so not me! Scrolling through the latest builds on RB I suddenly realized I did not put on my new daily.

Frame used: the BabyMod 2.5" (3/3.5") modular open source frame.

I figured this way I can use the top plate with O3 mounted and swap it easily over on another frame without having to rebuild each time. So far I've been flying it non stop for the past month or so.

Ended up with re using the fc from my first dji/vista build as I hardly flew that one. Ordered 1202.5 6000kv and strictly flying it on 4s. I would not be myself if I didn't scrape unnecessary weight so the O3 stack and cam had to undress. Unfortunately my fc usb port was broken already on the previous build so I had to fly with the settings from 2yrs ago. Rates were lower than my usual which I turned out to quite like alot! I think max roll 6/700 ish.

I can go on but the thing is a rocket, I used 450mah 4s mainly but 650mah is also do able. With 4s it tosses around so nice and has some good momentum to hang. With a ridiculous punch on tap. The motor size was kind of expirimental, I thought too light but man was I wrong. I totally did not expect this to feel so locked in. Took it with me on holiday and flew tens of packs per day in the major back yard there.


Part List


The BabyMOD : 2.5/3/3.5 inch HD FPV Frame by ledroneclub
See Site

Flight Controller

JHEMCU GHF13 AIO 16x16mm F4 Flight Controller 13A Blheli_S 2-4S
See Site


4 x Rcinpower Gts V2 1202.5


Gemfan 2512 2.5Inch 3-Blade 1.5mm Hole Propeller - 4CW+4CCW (6 builds)

FPV Camera

DJI O3 Air Unit FPV Camera Module (12 builds)

FPV Transmitter

DJI O3 Air Unit Transmission Module (28 builds)


HappyModel 2.4GHz EP1 RX ELRS Receiver (107 builds)


Tattu 450mAh 3S1P 11.1V 75C Lipo Batterij met XT30 stekker · Toemen Modelsport


Tattu 14.8V 75C 4S1P 450mAh Lipo Battery Pack with XT30 Plug (2 builds)


TBS Tango 2 Pro - FPV RC Radio Drone Controller (106 builds)


DJI Goggles 2 - Ultra Low Latency 1080p/100FPS 4K/60FPS Digital HD FPV (22 builds)

3D Printed

The BabyMOD : 2.5/3/3.5 inch HD FPV Frame by ledroneclub
See Site


Standoff Spacer Stud Fastener

Misc Parts

Drone Racing Flight Controller

Radio Module

ELRS Nano TX Module (10 builds)

Battery Charger

ToolkitRC Charger DC 7-25V USB-C RC M4 Pocket LiPo 1-4S 5A
See Site

Soldering Iron

Fer à Souder Intelligent TS101 - Miniware (3 builds)
See Site
Show stores (10)


Sign in to comment

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more