Little one

By ageia11 on Dec 05, 2022

4  90  3

Hi this is my beginner setup. It flys very with 1S lipo (around 4-5 mins).

The main reason is for me to save my build somewhere with the parts, but if you want use my links to buy these parts.

Have a nice day!

Part List


FEICHAO 115mm Wheelbase Bottom Plate 3K with Camera Cover for Happymodel Crux3 FPV Drone

Flight Controller

BETAFPV F4 1S 12A AIO Brushless Flight Controller MPU6000 F411 BLHELIS 12A ELRS 2.4G V2.2 RX for RC FPV Racing 3inch Drones (3 builds)


4 x RCINPOWER GTS V2 1202.5 11500KV 2S 6000KV 4S Brushless Motor for FPV Racing 1.6inch-3inch Toothpick Cinewhoop Ducted Drones


Gemfan Hurricane 3018 3x1.8 3 Inch 2-Paddle Propeller 1.5mm /2.0mm Hole T Mount for RC Drone FPV Racing Toothpick Frame (8 builds)

FPV Camera

Caddx Ant Nano FPV Camera 1200TVL Global WDR with OSD 2g Ultra Light 1.8mm Lens 16:9 / 4:3 for FPV Racing Drone Aircraft Fixed W (131 builds)

FPV Transmitter

Happymodel OVX300 OVX303 5.8G 40ch 300mw VTX OpenVTX Long Range Receiver for DIY RC Racing Drone Accessories


Foxeer 2pcs Micro Lollipop 5.8G 2.5DBi High Gain Omni RHCP FPV Antenna SMA/RP-SMA/Angle MMCX/Straight MMCX/U.FL (3 builds)

Misc Parts

HappyModel ES24TX Pro 1000mW 2.4G ExpressLRS ELRS Micro TX Module with Cooling Fan RGB LED Module EP1 RX EP2 RX for RC FPV Drone

Misc Parts

ISDT Q8 MAX 1000W 30A 2-8S / Q6 Nano 200W 8A 2-6S Lipo Battery Balance Charger for Lilon LiPo LiHV NiMH Pb RC Models

Misc Parts

5Pairs XT60 Bullet Connectors Connector Plug Male & Female For RC ESC lipo battery

Misc Parts

2 x JMT XT30 Connector Male Female Plug for RC Drone Aircraft Quadcopter Motor ESC Battery
Show stores (1)


Sign in to comment

benjo   Feb 02, 2023  

I like it! Can you run that board on 2S? I know it says 1S in the name but the specs offer 2S? Maybe 1S high voltage would be the middle ground. I'm not sure I would want to push it but with a 12A rating...... It would be interesting to see how it performs on a higher voltage with that hardware.

scirocco   Dec 06, 2022  

hi to be careful with the crux3 canopy! it is very fragile special weight is over 40/50 gramm. Yes it is light 1.2g but very breakable like mirror:) I think later on you will change it. 3D print is more safety but 2-3-4 gramm.... I have own developed aloy canopy it is not beuty but same light 1.2g and more stable to use it and crush it :)

ageia11   Dec 06, 2022 

okay, thanks😊

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more