exorcist vista

By Waffles on Jul 04, 2021

18  299  2

Exorcist frame with a vista and toa motors.. This build took longer than I expected, the key was 5mm spacers.



Sign in to comment

Jodie Froster   Jul 09, 2021  

You really had to go the extra mile to get that vista in there. I'm impressed you got it all in. The way you mounted the esc's took me a while to figure out, very creative. Very clean, considering all the wires you had to route. The prints you made for your wiring/esc mounting are fascinating! I see that they hold the esc's, and they keep the wires safe from prop strikes, and generally lend some order to a lot of wires, in a small space. How are they attached? Are they ALSO the 5mm spacers??

Waffles   Jul 10, 2021 

Thanks for your comment, the wiring did take some effort to work. The print has a aluminum 5mm spacer (no thread) pressed into it. so the spacing amount is even all around. I will try and post some better pictures later.

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more