Cinesplore with Sharkbyte

By okeydokey on Jun 04, 2021

8  484  2

Finally made a FpvCycle Cinesplore

As you know parts from the good doctor can be hard to come by so I substituted T Motors instead of the factory suggested units. I also went with Sharkbyte on this unit as I can see more with it.

The only real issue was how to mount the sharkbyte whoop vtx on a 20X20 hole pattern. I ended up 3D printing an adapter in PETG, mounted the vtx and screwed in the board with M2 screws which I used plyers to sheer off the top of. Setting up sharkbyte can be a bit tricky but follow the directions word by word and you should be okay, the full canvas mode is great.

I ended up prtinting the wide mouth ducts from Thingiverse in PETG using a soldering iron to heat up the gromets that I ordered from Amazon. Ended up buying the ducts as well from FpvCycle but have yet to install them.
Most of the 3D printed parts like the camera mount etc are made from TPU 95 Duro. I used a Ender3 to pint mine with little fuss, just keep your TPU as dry as possible.

Carries a Hero 9 with the battery like a pro and the added weight helps with stabilization. The M3 standoffs 15mm are for the camera base and not completely nessary.

Many of the parts were purchased on sale so look around, some parts cannot be helped but many items are on sale by looking to various codes and or coupons.


Part List


FPVCycle CineSplore Frame (8 builds)

Flight Controller

Diatone MAMBA F722 MINI MK2/F40 MINI PRO BL32 6S STACK (8 builds)


4 x T-Motor F2203.5 1500KV/2850KV/3550KV Motor (7 builds)
See Site


HQProp Duct-76MMX8 for Cinewhoop Grey (2CW+2CCW)-Poly Carbonate

FPV Camera

Foxeer Digisight 2 Nano 720P Digital/Analog 4ms Latency Super WDR FPV Camera (9 builds)

FPV Transmitter

Fatshark SharkByte TX5S.1 Video Transmitter (8 builds)


Lumenier AXII 2 U.FL 5.8GHz Antenna - Extended Wire (RHCP)


TBS Crossfire Nano Rx FPV Long Range Drone Receiver (1488 builds)


TATTU 1300mAh 6S1P 75C 22.2V Lipo Battery Pack with XT60 plug (2 builds)

3D Printed

Camera Base plate FpvCycle Cinesplore by okeydokey
See Site

3D Printed

Antenna Support by okeydokey
See Site

3D Printed

CineSplore immortal T mount by billyrebellion
See Site

3D Printed

GoPro hero 9 mount by okeydokey
See Site

3D Printed

FPVCycle CineSplore Ducts by gvnstewart
See Site

3D Printed

adapter_20x20_frame_26x26_FC by crisat (2 builds)
See Site


uxcell Round Aluminum Standoff Column Spacer M3x15mm,for RC Airplane,FPV Quadcopter,CNC,Black,10pcs (3 builds)


DYWISHKEY 700 Pieces M3 Stainless Steel 304 Hex Socket Head Cap Bolts Screws and Nuts Assortment Kit

Misc Parts

CineSplore V3 Duct - set of 4

Misc Parts

uxcell Knurled Insert Nuts - 100Pcs M2 x 3mm Length x 3.2mm OD Female Thread Brass Threaded Insert Embedment Nut for 3D Printer

Misc Parts


Video Receiver

FatShark SharkByte RX5.1 Receiver Module (20 builds)

Misc Supplies

Loctite Threadlocker 242, 50mL Bottle, Blue
Show stores (7)


Sign in to comment

giuliobagat   Jun 14, 2021  

Which version of the T-motor did you put on? 2850 or 3550 KV?

okeydokey   Jun 14, 2021 

I used the 2850 Kv and a 4S battery

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more