GEPRC Phantom Toothpick

By ICARU5 on Apr 06, 2020

11  1,728  6

My first toothpick without making any compromises. Built like a big quad - no waiver of led and buzzer, coated to make it water resistant.

Σ 92g (60g + 2g Strap + 30g Lipo)

A fully assembled model is cheaper than the individual parts. You can get one here.
Also a complete stack with FC + ESC + VTX is cheaper than the individual parts. You can get one here


Part List


GEPRC GEP-PT PHANTOM Toothpick Freestyle 125mm 2.5 Inch FPV Racing Frame Kit 13.7g (9 builds)

Flight Controller

16x16mm Geprc Stable F411 Stack Part F4 Flight Controller AIO OSD BEC for RC Drone FPV Racing


4 x 16x16mm Geprc Stable F411 Stack Part 12A BL_S 2-4S 4in1 Brushless ESC for RC Drone FPV Racing (2 builds)


4 x GEPRC SPEEDX GR1103 8000KV 2-3S 10000KV 1-3S FPV Racing Brushless Motor for RC Drone (5 builds)


5Pairs HQ Prop Micro Prop 65mm Bi-Blade 2.5" Prop 1.5mm Shaft Propeller For FPV Racing (2 builds)

FPV Camera

Caddx Turbo EOS2 1200TVL 2.1mm 1/3 CMOS 4:3 FPV Camera for Eachine Trashcan RedDevil URUAV UR85 Whoop

FPV Transmitter

16x16mm Geprc Stable F411 Stack Part 5.8G 48CH 25/100/200mW Switchable FPV Transmitter for RC Drone


Lumenier Micro AXII U.FL 5.8GHz 1.6dBi Gain FPV Antenna RHCP / LHCP For RC Drone (5 builds)


Team BlackSheep TBS Crossfire Nano RX Fernsteuerung Empfänger
See Site


Gens Tattu 7.4V 450mAh 75C 2S1P Lipo Battery With XT30 Plug For FPV RC Model (2 builds)

3D Printed

GEPRC GEP-PT PHANTOM Frame Spare Part Bottom Plate/ Top Plate/ Side Plate/ 3D Printing/ Screw (2 builds)


4x Lipo strap 7x260 (2 builds)
See Site


HGLRC Super Mini 1.38g WS2812 Colorful LED w/ 5V Active Alarm Buzzer Support Cleanflight Betaflight (19 builds)

Misc Parts

Silikon konforme Beschichtung 422B MG Chemicals Silicone Modified Conformal Coating (5 builds)
See Site

Misc Parts

Poppstar selbstverschweißendes Silikonband transparent 3m x 38mm (4 builds)
See Site
Show stores (5)


Sign in to comment

Prowan14   Nov 17, 2020  

hey man! nice build! i swamped my fm+ for a crossfire reciever but cant get any stick inputs. im sure its wired correctly, its set to crsfr on config tab too. reconnect fm+ and switched backed to sbus and it worked.

Show 2 more comments
ICARU5   Nov 18, 2020 

Here is the user manual for the GEPRC FC which I'm using, including a wiring diagram and the betaflight settings for Crossfire:

Prowan14   Nov 18, 2020 

i have the same FC as you. i follow all the steps. made sure its wired to the correct pads and made sure to change change it in betaflight to crsfr. im connecting to reciever but no stick inputs

ICARU5   Nov 19, 2020 

Check this out

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more