Gatehunter RS6 V1.1

By Dave_C FPV on Mar 04, 2019

34  1,232  7

I decided to rebuild my 6 inch 6S setup with a few updates. Apart from switching to a much stiffer 5mm bottom plate
I re-designed the canopy to fit a standart GoPro mount and and an SMA type antenna.
Main objective of the updates was to make the build more mid-range capable and have HD video while still being "race ready" after taking off the GoPro.
I get around 3.5 km of range out the video system. After that the quality goes down noticeably. Flight times over 6 minutes are no probem with a 1300mah 6S flown very carefully. I also tried using 2x1300mah 4S and it flies surprisingly good for some relaxed long range cruising.

The standard GoPro mount is just super convenient! I got really annoyed every time I had to pull my GoPro out of one of the usual TPU mounts to put it on another quad. Also being able to adjust the camera angle is a really cool feature. The downside is that the camera kind of sticks out in the front. But I suppose there are some solutions to that already on Thinigverse.

Since I got quite a lot of requestst, the frame is now available from Armattan Productions
The TPU parts are on Thingiverse: You will need a 20x5mm screw and a Propnut to fix the cam.
Armattan usually takes a while to ship but their manufacturing quality is really great.



Sign in to comment

CombreFPV   Mar 29, 2019  

Can u mount your esc just to the left or right side? Looks like very limited space

EuthaNasi   Mar 08, 2019  

The soldering on the 4-in-1 looks amazing! Any tips? What iron and solder do you use? Great build and footage, gets me tempted to build something long range...

Dave_C FPV   Mar 08, 2019 

Nothing special to be honest. I use a cheap soldering station & some lead solder from Amazon.
Using a bit of flux and a bigger soldering tip always helps a lot.

The Van   Mar 07, 2019  

Ultra clean. Take my money? :)

Jaub   Mar 04, 2019  

How do you like the amxinno motors?

Dave_C FPV   Mar 04, 2019 

I love them. Really good motors!

Dave_C FPV   Mar 04, 2019  

Some flying footage (its not the exact same setup but very similar) :

Guides & Reviews

Jun 21, 2021

AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..

Read more
Mar 04, 2021

With the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..

Read more