Tagged Products - plasma+black+tilt
(118)
results 1 - 20 of 118 reviews
0
This mount is worth every penny, it is very sturdy and versatile. It takes two people to mount the TV to the wall, so don't try to do it yourself alone
5 price(s)
0
This is the first product I am taking the time to review. Not my first wallmount, but this one was so easy and saved me so much time I felt it deserved a review. All the parts and more were included. Simply Drill 4 holes into the studs to attach to your wall, then use the included screws that fit your tv to mount the bracket to your TV. After that it just sits on top with 2 little screws for extra safety. I highly recommend this, the mount I bought before for a different tv had issues with moving a few degrees left and right, and wasn't near as sturdy as this one which gives me great peace of mind.
0
I was definitely skeptical at first, given the low price compared to the $400-$500 mounts you can buy at the big retail stores.
I hung it above my fireplace in my new home that was studded for a plasma TV. Easy as pie with a small socket wrench (don't try to screw them in by hand). And definitely get someone to help you hang it if it's a big TV like mine. I have a 52" Sharp Aquos Flat Panel, model number 52D82U.
It's been on the wall for about a month now. I check the screws on the back every few days to make sure the TV is secure. So far, so good. Has shown no signs of slipping or anything else that would make me have a heart attack.
I hung it above my fireplace in my new home that was studded for a plasma TV. Easy as pie with a small socket wrench (don't try to screw them in by hand). And definitely get someone to help you hang it if it's a big TV like mine. I have a 52" Sharp Aquos Flat Panel, model number 52D82U.
It's been on the wall for about a month now. I check the screws on the back every few days to make sure the TV is secure. So far, so good. Has shown no signs of slipping or anything else that would make me have a heart attack.
0
The Peerless PT660 tilting wall mount worked out well. It's heavy-duty, so it will support up to 100 lbs and it comes with a large variety of fasteners so that you can attach it to about any wall surface. In my case, it was for a Samsung 50" plasma set that went above a fireplace. The mounting bracket was installed to the sheetrock - or more specifically to the 2 studs behind the sheetrock (usually spaced 16" apart) - with 4 large lag screws and washers. The mounting bracket itself is on the order of 32", so you can only attach it to 2 studs at best. Once you figure where the mounting bracket goes and level it - then attach it to the wall. The 2nd part that attaches to the TV required no spacers - just 4 bolts - for a simple attachment. The hardest part is lifting your TV up and onto the wall mount. Have at least 2 people available for this. I used 3 people: 2 to lift the TV and 1 to hold the attached cables out of the way and into their proper position on the fireplace mantle. I recommend
...
more
0
This mount (VMPL3B) was identified by Sanus as the one to fit a Sharp LC65D64U TV. (1)While the kit came with several different sizes of bolts to fit various models, it did not provide the metric size needed for this specific Sharp TV. The four bolts needed were available (M10 - 30mm) at Home Depot, $.80 each (plus washers needed). (2)The slots in the mounting brackets were not wide enough to allow the proper bolts to pass through. I was able to file the slots wider (not difficult)to allow the bolts to pass. After that mount was easy to install with all needed hardware provided and works great. Even with this blip the mount is well worth buying due to the more than $400.00 saving over the mount offered by Sharp.
0
I will recommend this model to anyone hanging a large screen LCD. I hung a Samsung LN52A650 and it was easy to hang the TV. This updated model has a larger space between the adjustable hanging brackets and makes routing the TV cords and cables an easy task. All different kinds of screws are included for mounting and the directions are well explained. Would recommend this mount to everyone.
0
All the professionals I spoke to recommended Peerless. To get this unit at the Amazon discounted rate was indeed a bonus. The only fault I found with the unit was that the instructions for drilling the holes placed my 58" plazma too high on the wall. It was a simple fix, thus the high rating.
0
I haven't installed it yet, but am impressed so far.. It is very well made and designed for heavy plasma screens. Complete ,well organized hardware package and clear instructions.
In my opinion,expensive but worth it.
In my opinion,expensive but worth it.
0
After much thought bought this mount. As most installers in my area were asking for $400 or more I proceeded to install this on my own. Beaware that this mount is quite heavy. But works wonderfully. I mounted a 52" Samsung A650 and it works great. It remains in the position that you want it to if you did the setup right. And that means balancing the TV by centering it on the mount. The only con that I can come up with is that the back of the TV stays about 4" from the wall even in the totally folded up position. Would definetly recommend it.
0
We just installed our 50" Panasonic Viera Plasma on this mount, and it went up great. The only complaint I have it that once the TV is on the wall, it is kind of hard to get the cords behind the TV (at least to see what you are doing) because it doesn't tilt up very far. Other than that minor complaint, we love it!
0
Great delivery Service. Great product. Sturdy, wll made and low profile to wall behind Tv. Easy enough for handyman to install with a drill, tape measure, level, and ability to locate wall studs. Would definitely recommend product and service.MLT25
0
I purchased this wall mount basically because of the price. Of course i googled the product and could not find it under $100. Ordering was easy and it arrived before the estimated arrival date. The Sanus wall mount is high quality steel and very sturdy. The instructions were easy to follow and all the extra hardware was great allowing for installation onto any wall. Even if you are not handy, it is easy to install. This product is outstanding. When i am ready to upgrade from my 50" to a 60" i will be looking for this product again. Overstock out did themselves on this one.
0
This is a great mount, very easy to install and if you want to turn it into an articulating mount you can add an arm to it. Which make a very inexpensive
articulating mount.
articulating mount.
0
The product arrived very quickly, in good shape and was exactly as advertised. We had no problems mounting it and it was just what we were hoping for. High quality, solid arm.
0
I am most pleased with this unit. Previous reviews indicated it was a first class wall mount so I decided to purchase it. Shipping was extremely fast. The unit has performed as stated and I am happy to give it a 5 star rating as did previous raters. I will also give first priority to Overstock.com on pending internet purchases.
0
This product worked out great because at first I was not sure about it being mounted on the fireplace. It looked great and I highly recommend this item to everbody. Great product, great price so what are you waiting for purchase it!
0
This is a very sturdy and well built wall mount for a large TV. It was easy to install using the supplied documentation and came with a lot of extra mounting hardware to fit a variety of televisions. Would highly recommend this product.
0
I am completely happy with this wall mount. As long as you follow the directions to put up the wall mount you will be fine. It is a great product and I have no complaints.
0
I purchased this wall mount for a new Pioneer PDP-6010FD 60" plasma flat screen, and can highly recommend this mount. It is engineered and built with superior construction quality, easily holding my plasma TV weighing about 150 pounds (rated up to 250lbs). Mounting the universal bracket to the back of the plasma was extremely easy, just four bolts and washers (provided) that locked down, make for an extremely rigid mounting of the TV onto the bracket.
Since this mount covers televisions up to 71", it should work for most sets, as long as the maximum horizontal distance between the mounting holes is about 35" or less (check the product manual to get the exact maximum distance). The bracket's width and weight handling capacity requires that you mount it onto 3 wall studs, as it is approximately 40" wide. However, this actually helps you with mounting the bracket in a very level manner.
Here is a short narrative of how you go about mounting your TV using this wall mount. First, locate the
Since this mount covers televisions up to 71", it should work for most sets, as long as the maximum horizontal distance between the mounting holes is about 35" or less (check the product manual to get the exact maximum distance). The bracket's width and weight handling capacity requires that you mount it onto 3 wall studs, as it is approximately 40" wide. However, this actually helps you with mounting the bracket in a very level manner.
Here is a short narrative of how you go about mounting your TV using this wall mount. First, locate the
...
more
0
I bought the mount for a Samsung Series 5, 46" LCD TV, model LN46A550. The manufacturer didn't specify if this model would work or not, I assume since it is one of Samsung's newer lines. However I noticed that it did work on lots of other Samsungs so I decided to give it a shot. It worked just fine. The mount is a nice heavy gauge metal construction and assembly was straight forward. I highly recommend a tilting mount vs a fixed one so you can tilt the TV up to attach cords. Otherwise you have no space to work with unless the TV comes totally off of the mounting bracket. I paid $75 on Amazon.com vs $250 for a similar mount at the big box electronic stores and I am completely satisfied.
