...

4 at 2 ohms) to power your high-quality speakers. It also has built-in 4-channel crossovers. Speaker level inputs allow for easy connection to Head unit. Not only will your Music be louder, it'll also be cleaner, getting the most out of your speakers and your music. Constant road noise makes it hard for the music to be heard clearly. But with up to 600-Watts of max power, you get to hear every Word and note. 60-Watts x 4, at 4 ohms Output power 60-Watts Dynamic Power at 4 ohms 75-Watts x 4 at 2 ohms output power 150 Watts x 2, at 4 ohms Bridge Peak Music Power: 600-Watts Load Impedance Capability: 2-8 Ohm Stereo, 4-8 Ohm (Bridged) Frequency Response: 10Hz - 50kHz Total Harmonic Distortion: 0.010% PWM Regulated MOSFET Power Supply Screw-Type: Speaker Terminals Balanced Isolator Input Circuit Input Level Control Hi-Volt (400mV - 6.5v) Built-in Crossover LPF/HPF (Front/Rear Independent) Crossover Frequency Range: 80Hz, -12dB/Oct. Dimensions: 11-13/16" x 2-3/8" x 13-1/8" (300 mm x 60 mm x 334 mm) Professional installation required

...

4 at 2 ohms) to power your high-quality speakers. It also has built-in 4-channel crossovers. Speaker level inputs allow for easy connection to head unit. Not only will your music be louder, it'll also be cleaner, getting the most out of your speakers and your music. Constant road noise makes it hard for the music to be heard clearly. But with up to 600-Watts of max power, you get to hear every word and note. Load Impedance Capability - 2-8 Ohm Stereo, 4-8 Ohm (Bridged) Frequency Response - 10Hz - 50kHz Total Harmonic Distortion - 0.010% PWM Regulated MOSFET Power Supply Screw-Type - Speaker Terminals Balanced Isolator Input Circuit Input Level Control Hi-Volt (400mV - 6.5v) Built-in Crossover LPF/HPF (Front/Rear Independent) Crossover Frequency Range - 80Hz, -12dB/Oct. Dimensions - 11-13/16 x 2-3/8 x 13-1/8 (300 mm x 60 mm x 334 mm) Professional installation required

...

• S/N Ratio: 95 dB • Speaker Level Inputs • Gain Control • Beat Frequency Control

...

and your music. Constant road noise makes it hard for the music to be heard clearly. But with 600 watts max. power, you'll get to hear all the words and all the notes.

...

watts x 4 at 2 ohms) plenty of juice to power your high-quality speakers. It's also got built-in 4-channel crossovers. Speaker level inputs for easy connection to an OEM headunit. Oversized power terminals. And a wide input level of 400mV to 6.5V. Higher Power - Having more power isn't just about LOUD. It's also about CLEAN, getting the most out of your speakers and your music. Constant road noise makes it hard for the music to be heard clearly. But with 600 watts max. power, you'll get to hear all the words and all the notes. 4-Channel Crossovers - For getting the music just the way you like it, 4-channel crossovers are tough to beat. You can route the low frequency signals (80Hz or lower, -12dB/octave) to the speakers that handle them best, and filter out the higher-frequency signals. This optimizes your system's efficiency and delivers the best possible sound quality. Speaker Level Inputs - What, you DON'T own a Pioneer headunit? Well, we won't hold it against you. In fact we'll even help you build onto your system. The GM-6300F's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. SO, the install goes faster, you save money, and you've got a Pioneer amp in your vehicle.